How to Assemble a Two-Drawer Wooden Nightstand with Integrated Handles

Step 1: Unboxing & Organizing

Instruction: Carefully remove all parts from the packaging. You should have the top panel (with rounded edges), two side panels, a bottom panel, a back panel, two drawer fronts (with integrated handle cutouts), and the necessary drawer side pieces, drawer bottoms, plus a hardware kit (screws, bolts, possibly wooden dowels). Lay everything out on a clean surface, checking each item against your assembly manual.

Image 1 (Wide Shot): The wooden panels (top, bottom, sides, back), two drawer fronts with handle cutouts, drawer side pieces, and labeled hardware packets are neatly arranged on the floor. A small toolkit (screwdriver, hex key) rests to one side, ready for assembly.

Step 2: Building the Main Frame

Instruction: Identify the two side panels and attach the bottom panel between them using the provided bolts or screws. Keep the bolts slightly loose so you can adjust the alignment if needed. Next, secure the back panel, ensuring it lines up with the edges of the side panels. Finally, position the top panel with its rounded edges on top of the frame, fastening it with screws through the pre-drilled holes.

Image 2 (Wide Shot): The partially assembled nightstand frame stands upright, with a hex key being used to tighten bolts at each corner. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Assembling the Drawers

Instruction: Construct each drawer by connecting its side panels, bottom board, and front panel (featuring the handle cutouts). If there are additional screws for the drawer runners, secure them now. Repeat the process for the second drawer.

Image 3 (Wide Shot): Two drawer boxes, each with a smooth front panel showcasing integrated handle cutouts, are shown partially assembled on the floor. A screwdriver is visible, tightening the final screws for the drawer sides.

Step 4: Installing the Drawers & Adjusting

Instruction: Carefully slide each assembled drawer onto the rails inside the nightstand frame. Test the drawers by gently pulling them in and out to ensure they glide smoothly. If they catch or stick, adjust the runners or tighten any loose screws until the drawers move freely.

Image 4 (Wide Shot): The nightstand is upright, with each drawer partially open to demonstrate smooth gliding. A small bag of screws is on the floor, used for final adjustments.

Step 5: Final Checks & Placement

Instruction: Gently shake the entire unit to confirm stability. Tighten any remaining bolts or screws, and wipe down the surfaces with a soft cloth to remove dust or fingerprints. Finally, place your new nightstand in your bedroom or living space—use the drawers to store essentials and the top surface for décor, a lamp, or other personal items.

Image 5 (Wide Shot): The fully assembled nightstand stands in a well-lit room, drawers neatly closed, and the integrated handle cutouts giving it a clean, modern appearance.

Conclusion

By following these five steps, you’ll have a minimalist two-drawer nightstand that offers convenient storage and a seamless design. Its smooth wooden finish and built-in handle cutouts create a sleek, contemporary look, while the rounded top panel adds a subtle touch of style. Enjoy your newly assembled piece and the organization it brings to your space!