How to Assemble a Two-Drawer Wooden Nightstand with Integrated Handles

Step 1: Unboxing & Organizing

Instruction: Carefully remove all components from the packaging. You should have two side panels, a top panel, a bottom panel, a back panel, two drawer fronts (each with a built-in handle cutout), and the corresponding drawer side pieces, bottoms, and hardware (screws, bolts, and possibly wooden dowels). Lay everything out on a clean surface, verifying each item against your assembly manual.

Image 1 (Wide Shot): The wooden panels (top, bottom, sides, back), two drawer fronts with cutout handles, drawer side pieces, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) rests nearby, ready for assembly.

Step 2: Building the Main Frame

Instruction: Identify the two side panels. Attach the bottom panel between them using the bolts or screws provided. Keep the bolts slightly loose so you can adjust the frame if needed. Next, secure the back panel, aligning it with the edges of the side panels. Finally, position the top panel, ensuring it sits flush with the sides, and fasten it with the remaining screws.

Image 2 (Wide Shot): The partially assembled nightstand frame stands upright, with a hex key being used to tighten bolts at each corner. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Assembling the Drawers

Instruction: Construct each drawer by connecting its side panels, bottom board, and front panel (featuring the integrated handle cutout). If the drawer runners aren’t pre-installed, attach them now according to the manual’s guidelines. Repeat for the second drawer.

Image 3 (Wide Shot): Two drawer boxes, each with a smooth front panel and a cutout handle, are shown partially assembled on the floor. A screwdriver is visible, tightening the final screws for the drawer sides.

Step 4: Installing the Drawers & Adjusting

Instruction: Carefully slide each assembled drawer onto the rails inside the nightstand frame. Test the drawers by gently pulling them in and out to ensure they glide smoothly. If they catch or stick, adjust the rails or tighten any loose screws until the movement is seamless.

Image 4 (Wide Shot): The nightstand is upright, with each drawer partially open to demonstrate smooth gliding. A small bag of screws is on the floor, used for final rail adjustments.

Step 5: Final Checks & Placement

Instruction: Gently shake the nightstand to confirm stability. Tighten any remaining bolts or screws, then wipe down all surfaces with a soft cloth to remove dust or fingerprints. Finally, position your new nightstand beside your bed—use the two drawers to store personal items, and place a lamp or décor on the top surface for a clean, modern look.

Image 5 (Wide Shot): The fully assembled nightstand stands in a bright bedroom, drawers neatly closed, highlighting the integrated handle cutouts for a sleek appearance.

Conclusion

By following these five steps, you’ll have a functional and stylish two-drawer nightstand that blends contemporary design with everyday practicality. The integrated handle cutouts create a smooth, modern finish, while the sturdy wooden construction ensures durability. Enjoy your newly assembled piece and the tidy storage it brings to your bedroom!