How to Assemble a Two-Drawer Wooden Nightstand with Rounded Corners

Step 1: Unboxing & Organizing

Instruction: Carefully remove all parts from their packaging. You should have the main wooden body (with rounded edges), two drawer fronts (also rounded at the corners), the drawer side pieces, drawer bottoms, four tapered legs, and a hardware kit (screws, bolts, and any additional handles if not pre-installed). Lay everything out on a clean surface, checking off each item against your assembly manual.

Image 1 (Wide Shot): The wooden nightstand body, two drawer fronts, drawer sides, four tapered legs, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) is set to one side, ready for assembly.

Step 2: Attaching the Tapered Legs

Instruction: Flip the nightstand body upside down. Align each tapered leg with the pre-drilled holes or brackets at the corners of the bottom panel. Secure them using the bolts or screws provided, leaving them slightly loose until all four legs are in place. Once positioned, tighten the bolts evenly for stability.

Image 2 (Wide Shot): The nightstand body lies on its back, with a hex key being used to fasten one of the tapered legs. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Assembling the Drawers

Instruction: Construct each drawer by connecting its side panels, bottom board, and the front panel (which includes the built-in handle cutout or attached handle piece). If the handle hardware isn’t pre-installed, secure it from the inside of the drawer front. Repeat for the second drawer.

Image 3 (Wide Shot): Two drawer boxes, each with a smooth, rounded front panel, are shown partially assembled on the floor. A screwdriver is visible, tightening the final screws for the drawer sides.

Step 4: Installing the Drawers & Adjusting

Instruction: Carefully slide each assembled drawer into the designated rails or grooves inside the nightstand body. Test them by gently pulling in and out to ensure a smooth glide. If they catch or stick, adjust the rails or tighten any loose screws until the drawers move freely.

Image 4 (Wide Shot): The nightstand is upright, with each drawer partially open to demonstrate smooth gliding. A small bag of screws is on the floor, used for final rail adjustments.

Step 5: Final Checks & Placement

Instruction: Gently shake the entire nightstand to confirm stability. Tighten any remaining bolts or screws, then wipe down the wooden surfaces with a soft cloth to remove dust or fingerprints. Finally, place your new nightstand beside the bed or sofa—use the two drawers to store personal items, and style the top with décor or essentials for a neat, mid-century-inspired look.

Image 5 (Wide Shot): The fully assembled nightstand stands in a bright room, drawers neatly closed, showcasing its rounded corners, warm wood finish, and tapered legs.

Conclusion

By following these five steps, you’ll have a charming two-drawer nightstand that combines retro flair with modern functionality. Its rounded corners and tapered legs create a classic mid-century look, while the roomy drawers keep your space organized. Enjoy the timeless style and practicality this piece brings to your home!