How to Assemble a Two-Drawer Wooden Nightstand with a Floating Base

Step 1: Unboxing & Organizing

Instruction: Carefully remove all parts from their packaging. You should have the main wooden panels (two sides, a bottom, a back, a top panel), two drawer fronts (with integrated handle grooves), drawer side pieces, drawer bottoms, and a hardware kit (screws, bolts, possibly wooden dowels). If the base is a separate piece, lay that out as well. Check each item against your assembly manual.

Image 1 (Wide Shot): The wooden side panels, top, bottom, back panel, two drawer fronts, drawer sides, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) rests to one side, ready for assembly.

Step 2: Building the Main Frame

Instruction: Identify the two side panels and attach them to the bottom panel using the provided bolts or screws. Keep the hardware slightly loose so you can adjust the alignment. Next, secure the back panel to the sides, then place the top panel, ensuring all corners match up evenly. Tighten all screws once the frame is properly aligned.

Image 2 (Wide Shot): The partially assembled nightstand frame stands upright, with a hex key being used to tighten bolts at each corner. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Assembling the Drawers

Instruction: Construct each drawer by connecting its side panels, bottom board, and the front panel (featuring an integrated handle groove or push-to-open design). If the drawer runners aren’t pre-installed, secure them now according to the manual’s guidelines. Repeat for the second drawer.

Image 3 (Wide Shot): Two drawer boxes, each with a smooth front panel and handle-free design, are shown partially assembled on the floor. A screwdriver is visible, tightening the final screws for the drawer sides.

Step 4: Installing the Drawers & Attaching the Base

Instruction: Carefully slide each assembled drawer onto the rails inside the nightstand frame, testing them by gently pulling in and out to ensure smooth movement. If the nightstand’s base is separate, flip the unit onto its side or back and align the base with the pre-drilled holes. Secure it with bolts, then return the nightstand to its upright position.

Image 4 (Wide Shot): The nightstand is upright, with each drawer partially open to demonstrate smooth gliding. A small bag of screws is on the floor, used to attach the floating-style base.

Step 5: Final Checks & Styling

Instruction: Gently shake the entire nightstand to confirm stability. Tighten any remaining bolts or screws, and wipe down all surfaces with a soft cloth to remove dust or fingerprints. Finally, place your new nightstand next to the bed—use the drawers to store personal items, and enjoy the minimal look created by the integrated handles and floating base.

Image 5 (Wide Shot): The fully assembled nightstand stands in a well-lit bedroom, drawers neatly closed, highlighting the warm wood grain and sleek, floating design.

Conclusion

By following these five steps, you’ll have a contemporary two-drawer nightstand that pairs a minimal handle-free style with a subtle floating base. Its clean lines and sturdy construction make it an excellent addition to any modern bedroom, keeping your essentials organized while elevating the overall décor. Enjoy your newly assembled piece and the stylish convenience it offers!