How to Assemble a Two-Drawer Nightstand with Open Shelf

Step 1: Unboxing & Organizing

Instruction: Carefully remove all components from the packaging. You should have the two side panels, a top panel, a bottom panel, an open shelf board, and the front, back, and side pieces for the two drawers. Lay them out on a clean surface, along with the hardware (screws, bolts, drawer knobs) and any included tools. Compare each item to your assembly manual to ensure nothing is missing.

Image 1 (Wide Shot): The wooden panels (light-colored sides, top, bottom, and shelf), two drawer fronts (white), side drawer pieces, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) sits to one side, ready for assembly.

Step 2: Building the Frame

Instruction: Identify the side panels and attach the bottom panel between them. Secure with the provided screws or bolts through the pre-drilled holes. Next, fasten the top panel to the side panels, ensuring it aligns evenly. Leave the hardware slightly loose until the entire frame is assembled and level, then tighten all screws.

Image 2 (Wide Shot): The side panels stand upright, with the bottom and top panels partially attached. A hex key is being used to tighten bolts at each corner, while extra screws lie close by.

Step 3: Installing the Open Shelf Board

Instruction: Slide or place the open shelf board between the side panels, above the two drawers’ designated area. Align the shelf board’s pre-drilled holes with the side panels, and secure it using the screws provided. Confirm it’s level before fully tightening.

Image 3 (Wide Shot): The frame is taking shape, with the shelf board positioned in the middle. A screwdriver is visible, fastening the final screws on each side.

Step 4: Assembling & Inserting the Drawers

Instruction: Assemble each drawer by connecting its side pieces, back panel, and front panel. Attach the knobs or handles to the front if they aren’t pre-installed. Once the drawers are assembled, slide them onto the rails inside the nightstand, ensuring they move smoothly.

Image 4 (Wide Shot): Two drawers—each about 18.31" wide and 5.12" tall—are shown partially pulled out from the frame. A small bag of screws is on the floor, used to attach the drawer fronts and knobs.

Step 5: Final Checks & Personalization

Instruction: Gently shake the nightstand to confirm stability. Tighten any loose screws or bolts, then wipe down the surfaces with a soft cloth to remove dust or fingerprints. Finally, place your new nightstand in its designated spot—use the open shelf for books or décor, and keep smaller items organized in the two drawers.

Image 5 (Wide Shot): The fully assembled nightstand stands in a bright bedroom corner, the open shelf ready for easy-to-reach items, and the drawers closed neatly. The light wood sides and white drawers create a modern, clean look.

Conclusion

By following these five steps, you’ll have a functional and stylish nightstand with an open shelf and two drawers. Its compact size and simple design make it suitable for a variety of bedroom styles, offering both easy-access storage and a polished finish. Enjoy the convenience and charm this piece brings to your space!