How to Assemble a Rolling Nightstand with Two Drawers and Open Shelf

Step 1: Unboxing & Organizing

Instruction: Carefully remove all parts from the packaging. You should have four main corner posts (forming the frame), two drawer units (fronts, sides, and bottoms), a top panel, a middle shelf panel, a back panel (if included), caster wheels, and a hardware kit (screws, bolts, drawer handles). Lay everything out on a clean surface, checking each item against your assembly manual.

Image 1 (Wide Shot): The wooden frame posts, shelf panel, drawer parts, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) rests nearby, ready for assembly.

Step 2: Building the Main Frame

Instruction: Identify the four corner posts and the top panel. Align the pre-drilled holes according to the manual, then secure them with bolts or screws. Next, attach the middle shelf panel between the posts at the designated height. Keep the hardware slightly loose until the entire frame is squared and level, then tighten all bolts evenly.

Image 2 (Wide Shot): The partially assembled frame stands upright, with a hex key being used to tighten bolts at each corner. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Assembling & Installing the Drawers

Instruction: Next, construct each drawer by connecting its side panels, bottom board, and front panel (which may feature integrated handles or cutouts). Slide the drawers onto the designated rails or supports inside the frame, ensuring they move smoothly. If your design includes a back panel, attach it now using the provided screws.

Image 3 (Wide Shot): Two drawers—each with a front cutout handle—are shown partially open beneath the shelf. A screwdriver is visible, fastening the final screws for the drawer assembly.

Step 4: Attaching the Caster Wheels & Top Finishing

Instruction: Flip the nightstand frame carefully onto its back or side. Align each caster wheel with the pre-drilled holes at the bottom of the posts. Secure them using the bolts provided, ensuring they rotate freely. If the top panel or edges need additional support brackets, install them now.

Image 4 (Wide Shot): The nightstand lies on its back, with a hex key fastening the caster wheels to each corner post. A small bag of screws is visible on the floor, awaiting final adjustments.

Step 5: Final Checks & Personalization

Instruction: Gently return the nightstand to its upright position. Shake it slightly to confirm stability, and tighten any loose bolts. Wipe down all wooden surfaces with a soft cloth to remove dust or fingerprints. Finally, slide the drawers in place, arrange items on the open shelf, and enjoy your new rolling storage solution!

Image 5 (Wide Shot): The fully assembled nightstand stands in a well-lit room, drawers neatly closed, caster wheels ready for easy movement, and the open shelf ready for books or décor.

Conclusion

By following these five steps, you’ll have a practical rolling nightstand that combines mobility with storage. The two drawers keep essentials organized, while the open shelf offers quick access to books, electronics, or décor. Enjoy the convenience of this versatile piece and the warm, natural charm it brings to your space!