How to Assemble a Three-Drawer Nightstand with Raised Edges

Step 1: Unboxing & Organizing

Instruction: Begin by carefully removing all parts from the packaging. You should have two side panels, a bottom panel, a back panel, a top panel with raised edges, three drawer fronts, drawer sides, drawer bottoms, and a hardware kit (screws, bolts, drawer knobs). Lay everything out on a clean surface, checking each item against your assembly manual.

Image 1 (Wide Shot): The wooden panels (side, bottom, back, top with a lip), three drawer fronts, drawer side pieces, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) rests to one side, ready for assembly.

Step 2: Building the Main Frame

Instruction: Identify the two side panels and attach the bottom panel between them using the provided bolts or screws. Keep the hardware slightly loose to allow for minor adjustments. Next, secure the back panel, ensuring it aligns with the edges. Finally, place the top panel with the raised edge on the frame’s upper side, inserting screws through the pre-drilled holes.

Image 2 (Wide Shot): The partially assembled nightstand frame stands upright, with a hex key being used to tighten bolts at each corner. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Assembling the Drawers

Instruction: Construct each drawer by connecting its side panels and bottom board to the front panel. If the drawer knobs aren’t pre-installed, attach them from the inside of the front panel. Slide each assembled drawer onto the rails inside the nightstand frame, making sure they open and close smoothly.

Image 3 (Wide Shot): Three drawer boxes, each with a matching wood front and simple round knobs, are shown partially assembled on the floor. A screwdriver is visible, fastening the final screws for the drawer sides.

Step 4: Inserting the Drawers & Final Adjustments

Instruction: Carefully guide each drawer onto its designated rails within the nightstand. Test them by sliding them in and out to confirm a proper fit. If the drawers catch or stick, adjust the side rails or tighten any loose screws. Once everything is aligned, fully tighten all hardware.

Image 4 (Wide Shot): The nightstand is upright, with each drawer partially open to show smooth gliding. A small bag of screws is on the floor, used for final rail adjustments.

Step 5: Finishing Touches & Placement

Instruction: Gently shake the entire unit to ensure stability. Wipe down all wooden surfaces with a soft cloth to remove dust or fingerprints. Finally, place your new nightstand beside the bed or in your desired spot—use the raised top edge to keep items secure, and organize personal belongings in the three drawers below.

Image 5 (Wide Shot): The fully assembled nightstand stands in a bright bedroom, drawers neatly closed, and the raised edges on top providing a secure surface for décor or essentials.

Conclusion

By following these five steps, you’ll have a functional and stylish three-drawer nightstand that helps keep your space organized. The raised edges on the top panel provide added security for small items, while the three drawers offer ample storage. Enjoy your newly assembled furniture and the convenience it brings to your bedroom!