How to Assemble a Pastel Nightstand with Drawer and Open Shelves

Step 1: Unboxing & Organizing

Instruction: Carefully remove all components from their packaging. You should have four main side panels (two sides, a back, and a front support), a top panel, a bottom panel, two shelf boards, a single drawer assembly (front, sides, bottom), and the necessary hardware (screws, bolts, drawer knob). Lay them out on a clean surface, verifying each item against your assembly manual.

Image 1 (Wide Shot): The pastel side panels, top, bottom, two shelf boards, and labeled hardware packets are neatly arranged on the floor. A small toolkit (screwdriver, hex key) rests to one side, ready for assembly.

Step 2: Building the Main Frame

Instruction: Identify the two side panels and attach the bottom panel between them using the provided screws or bolts. Align the pre-drilled holes according to the manual, leaving the hardware slightly loose so you can make adjustments if needed. Once the bottom panel is secure, fasten the back panel or support piece, then attach the front support rail if included.

Image 2 (Wide Shot): The partially assembled nightstand frame stands upright, with a hex key being used to tighten bolts at each corner. A few extra screws lie on the floor, indicating ongoing assembly.

Step 3: Installing the Shelves

Instruction: Next, slide or place each shelf board between the side panels at the designated heights. Use the screws provided to secure them from the inside of the frame. Double-check that the shelves are level before fully tightening the hardware. These open shelves offer convenient storage for books, baskets, or décor.

Image 3 (Wide Shot): Two pastel-colored shelf boards are now in place, each resting snugly between the side panels. A screwdriver is visible, fastening the final screws to secure the shelves.

Step 4: Assembling & Inserting the Drawer

Instruction: Construct the drawer by connecting its side panels, bottom piece, and front panel. Attach the knob or handle to the front if it isn’t pre-installed. Gently slide the drawer onto the rails or guides beneath the top panel, ensuring it glides smoothly.

Image 4 (Wide Shot): The single drawer, featuring a small round knob, is partially pulled out from the nightstand. A small bag of screws lies on the floor, used to attach the drawer’s sides and knob.

Step 5: Final Checks & Personalization

Instruction: Gently shake the nightstand to confirm stability. Tighten any loose bolts or screws, then wipe down all surfaces with a soft cloth to remove dust or fingerprints. Finally, place your new pastel nightstand next to the bed or sofa—use the open shelves for quick-access items, and keep smaller belongings organized in the drawer.

Image 5 (Wide Shot): The fully assembled nightstand stands in a well-lit room, drawers neatly closed, and the open shelves styled with small decorative pieces. The soft pastel finish adds a bright, welcoming touch.

Conclusion

By following these five steps, you’ll have a charming nightstand that combines function and style. The single drawer provides hidden storage for personal items, while the open shelves keep books or décor within easy reach. Enjoy your new, pastel-colored addition and the refreshing accent it brings to your space!