How to Assemble a Multi-Level Cat Tower with Two Enclosed Boxes

Step 1: Unboxing & Organizing

Instruction: Carefully remove all parts from their packaging. You should have a base panel, multiple sisal-wrapped posts, two wooden boxes (each with circular entrances), a couple of platforms (with padded cushions), and a hardware kit (screws, bolts, and possibly an Allen wrench). Lay everything out on a clean surface, comparing each piece to your assembly manual.

Image 1 (Wide Shot): The wooden base, two box enclosures with circular cutouts, sisal-wrapped posts, padded platforms, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) rests nearby, ready for assembly.

Step 2: Securing the Base & Initial Posts

Instruction: Position the base panel on the floor. Identify the first set of sisal-wrapped posts that will support the lower box and any platforms at this level. Align each post’s pre-drilled hole with the corresponding hole on the base, then secure them with bolts or screws. Keep the hardware slightly loose until all posts are in place.

Image 2 (Wide Shot): The base lies on the floor, with a hex key being used to tighten bolts into one of the sisal posts. A few extra screws are visible, indicating ongoing assembly.

Step 3: Installing the First Box & Platform

Instruction: Once the initial posts are secure, position the first box on top of them. Match the box’s underside holes with the tops of the posts and fasten using the provided bolts. If a lower platform attaches at this stage, align its holes with another post or two, then secure it with screws. Make sure everything is level before moving on.

Image 3 (Wide Shot): The first box is partially attached atop the posts, while a small platform is being bolted to another post. A screwdriver is visible, tightening the final screws.

Step 4: Building Upward with the Second Box & Upper Perches

Instruction: Place the next set of sisal-wrapped posts on top of the first box or platform. Secure them using bolts through the box’s roof or platform holes. Position the second box at the desired level, aligning its underside holes with the new posts. Attach any additional platforms or perches at the top, using the same method. Ensure the padded cushions are placed on each platform for added comfort.

Image 4 (Wide Shot): The second box sits higher on the structure, with posts and platforms arranged at various levels. A small bag of screws is on the floor, used for final adjustments.

Step 5: Final Checks & Placement

Instruction: Gently shake the entire tower to confirm stability. Tighten any loose bolts or screws, and wipe down the surfaces to remove dust or fingerprints. Finally, position your new cat tower in a safe corner—your cat will love exploring the enclosed boxes, scratching the posts, and relaxing on the padded platforms.

Image 5 (Wide Shot): The fully assembled cat tower stands in a bright room, boxes neatly stacked, platforms padded, and sisal-wrapped posts ready for scratching.

Conclusion

By following these five steps, you’ll have a multi-level cat tower that offers plenty of fun and comfort for your feline companion. The enclosed boxes provide cozy hideaways, while the elevated platforms and sisal-wrapped posts satisfy a cat’s instinct to climb and scratch. Enjoy the peace of mind that comes with a happy, well-entertained pet!