How to Assemble a Multi-Level Cat Tower with Enclosed Hideaway

Step 1: Unboxing & Organizing

Instruction: Carefully remove all parts from the packaging. You should have the base panel, several sisal-wrapped posts, one or two flat perches, a round platform, an enclosed box with a window-like opening, and a hardware kit (screws, bolts, and possibly Allen wrenches). Lay everything out on a clean surface, checking each item against your assembly manual.

Image 1 (Wide Shot): The wooden base, enclosed box, multiple sisal-wrapped posts, flat perch panels, a round step, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) rests to one side, ready for assembly.

Step 2: Securing the Base & Initial Posts

Instruction: Position the base panel on the floor. Identify the first set of sisal-wrapped posts that will support the bottom level. Align each post’s pre-drilled hole with the corresponding hole on the base. Secure them with the bolts or screws provided, leaving the hardware slightly loose until all posts are in place.

Image 2 (Wide Shot): The base lies on the floor, with a hex key being used to tighten bolts into the first vertical post. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Attaching the Enclosed Box & Round Platform

Instruction: Once the bottom posts are secure, place the enclosed box on top of the designated posts. Match the holes on the box’s underside with the top of each post and fasten with screws. Next, attach the smaller round platform to one of the remaining posts. Keep the hardware slightly loose until you confirm alignment.

Image 3 (Wide Shot): The enclosed hideaway box is partially attached atop two posts, while a small round platform is being bolted to another post. A screwdriver is visible, tightening the final screws.

Step 4: Installing the Upper Perches

Instruction: Position the next set of sisal-wrapped posts on top of the enclosed box and/or base, as indicated by the manual. Secure them with bolts, then place the flat perch panels on top. Align each perch’s pre-drilled holes with the post tops. Once everything is in place, tighten all screws and bolts, ensuring the tower is stable.

Image 4 (Wide Shot): The cat tower is now taking shape, with one or two flat perch panels affixed at different heights. A small bag of screws is on the floor, used for final adjustments.

Step 5: Final Checks & Placement

Instruction: Gently shake the entire tower to confirm stability. Adjust or tighten any loose bolts or screws. Wipe down all surfaces with a soft cloth to remove dust. Finally, place your new cat tower in a safe corner or near a window—let your cat climb the posts, lounge on the perches, and enjoy the enclosed box for cozy naps.

Image 5 (Wide Shot): The fully assembled cat tower stands in a bright room, with the enclosed box and multiple perches ready for a cat’s exploration. The sisal posts offer plenty of scratching surfaces.

Conclusion

By following these five steps, you’ll have a sturdy cat tower that caters to your pet’s need for climbing, scratching, and secluded resting spots. The enclosed box serves as a cozy hideaway, while the multiple levels encourage exercise and engagement. Enjoy watching your cat explore their new kingdom!