How to Assemble a Modern Nightstand with Open Shelf and Two Drawers

Step 1: Unboxing & Organizing

Instruction: Carefully remove all components from their packaging. You should have the main curved body (with the patterned back), two drawer units (front, sides, and bottoms), four tapered legs, hardware (screws, bolts, drawer handles), and any shelf board or divider (if included). Spread everything out on a clean surface, comparing each part to your assembly manual.

Image 1 (Wide Shot): The curved black enclosure, two drawer fronts in a natural wood finish, side drawer panels, four slender legs, and labeled hardware packets are neatly arranged on the floor. A small toolkit (screwdriver, hex key) rests nearby, ready for assembly.

Step 2: Attaching the Legs

Instruction: Flip the main body of the nightstand upside down. Align each leg’s mounting plate with the pre-drilled holes at the bottom corners. Secure them with the provided bolts or screws, leaving them slightly loose until all four legs are in place. Once the legs are aligned and level, tighten the bolts evenly.

Image 2 (Wide Shot): The nightstand body lies on its back, with a hex key tightening bolts into one of the tapered legs. A few spare screws lie close by, indicating ongoing assembly.

Step 3: Assembling the Drawers

Instruction: Construct each drawer by connecting its side panels, bottom board, and front panel (which includes the handle or handle holes). If the handles are not pre-installed, attach them from the inside of the drawer front. Slide the drawers onto their rails inside the nightstand, ensuring they move smoothly in and out.

Image 3 (Wide Shot): Two wooden drawer boxes, each with a matching wood front and black handle, are shown partially assembled. A screwdriver is visible, fastening the final screws for the drawer sides.

Step 4: Inserting the Drawers & Checking the Shelf

Instruction: With the nightstand upright, carefully guide each drawer onto its corresponding rails. Gently push the drawers in to verify they slide without obstruction. If the open shelf has a removable or adjustable panel, insert it now, making sure the patterned back is visible and aligned.

Image 4 (Wide Shot): The nightstand stands upright, drawers halfway open to demonstrate smooth gliding. The patterned back panel is clearly visible through the open shelf area.

Step 5: Final Checks & Personalization

Instruction: Gently shake the entire unit to confirm stability. Tighten any remaining loose bolts or screws, and wipe down the surfaces with a soft cloth to remove dust or fingerprints. Finally, place the nightstand in your desired location—use the open shelf for décor or easy-access items, and keep smaller belongings organized in the two drawers.

Image 5 (Wide Shot): The fully assembled nightstand sits beside a bed, drawers neatly closed, and the open shelf styled with a small decorative piece. The contrast of the black enclosure and wooden drawers creates a modern look.

Conclusion

By following these five steps, you’ll have a contemporary nightstand that blends a chic black enclosure with warm wooden drawers. Its curved shape, open shelf with a patterned back, and slim legs make it a versatile addition to bedrooms or living spaces alike. Enjoy your new piece and the modern flair it brings to your home!