How to Assemble a Modern High-Gloss Nightstand with Two Drawers

Step 1: Unboxing & Organizing

Instruction: Carefully remove all parts from their packaging. You should have two side panels, a top panel, a bottom panel, a back panel, two drawer fronts (with integrated handle grooves or push-to-open edges), drawer side pieces, drawer bottoms, and a hardware kit (screws, bolts, and possibly drawer rails). Lay everything out on a clean surface, comparing each item to your assembly manual.

Image 1 (Wide Shot): The glossy panels (top, bottom, sides, back), two drawer fronts, drawer side pieces, and labeled hardware packets are neatly spread on the floor. A small toolkit (screwdriver, hex key) rests off to one side, ready for assembly.

Step 2: Building the Main Frame

Instruction: Identify the two side panels and attach them to the bottom panel using the provided bolts or screws. Keep the hardware slightly loose so you can adjust alignment if needed. Next, secure the back panel in place, and finally position the top panel, ensuring it’s level with the side panels. Once everything is squared up, tighten all screws and bolts.

Image 2 (Wide Shot): The partially assembled nightstand frame stands upright, with a hex key being used to tighten bolts at each corner. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Assembling the Drawers

Instruction: Construct each drawer by connecting the side panels, bottom board, and glossy front panel. If the design includes push-to-open hardware, install it now according to the manual’s guidelines. Repeat for the second drawer.

Image 3 (Wide Shot): Two drawer boxes, each with a glossy front and a handle-free design, are shown partially assembled on the floor. A screwdriver is visible, fastening the final screws for the drawer sides.

Step 4: Installing the Drawers & Base

Instruction: Carefully slide each drawer onto the rails inside the nightstand frame. Test them by gently pulling in and out to ensure smooth movement. If the unit comes with a separate black plinth base, flip the nightstand upside down, align the base with the pre-drilled holes, and secure it with bolts. Return the nightstand to its upright position.

Image 4 (Wide Shot): The nightstand is upright, drawers partially open to demonstrate smooth gliding. A small bag of screws is on the floor, used to attach the black base beneath the main unit.

Step 5: Final Checks & Placement

Instruction: Gently shake the entire piece to confirm stability. Tighten any loose bolts or screws, and wipe down the high-gloss surfaces with a soft cloth to remove dust or fingerprints. Finally, position your new nightstand beside the bed or in your desired location—use the top surface for décor or a lamp, and store personal items in the drawers for a clean, minimal look.

Image 5 (Wide Shot): The fully assembled, glossy nightstand stands in a bright room, drawers neatly closed, emphasizing its sleek design and subtle black base.

Conclusion

By following these five steps, you’ll have a modern nightstand that combines a refined high-gloss finish with discreet, handle-free drawers. The black base provides a stylish contrast, creating the illusion of a floating design. Enjoy your new piece and the polished, contemporary vibe it brings to your space!