Step 1: Unboxing & Organizing

Instruction: Carefully remove all components from the packaging. Each nightstand should include two side panels, a bottom panel, a back panel, two drawer fronts (with ridged detailing), drawer side pieces, drawer bottoms, and a hardware kit (screws, bolts, gold circle handles). Lay everything out on a clean surface, verifying each item against your assembly manual.

Image 1 (Wide Shot): The wooden panels (side, bottom, back), two ridged drawer fronts, drawer side pieces, and labeled hardware packets are neatly arranged on the floor. A small toolkit (screwdriver, hex key) rests to one side, ready for assembly.

Step 2: Building the Main Frame

Instruction: Identify the two side panels and attach the bottom panel between them using the bolts or screws provided. Keep the hardware slightly loose so you can adjust the alignment if necessary. Next, secure the back panel, ensuring it lines up with the edges of the side panels. Finally, position the top panel (or attach it if it’s separate) and tighten all screws once the frame is square.

Image 2 (Wide Shot): The partially assembled nightstand frame stands upright, with a hex key being used to tighten bolts at each corner. A few extra screws lie close by, indicating ongoing assembly.

Step 3: Assembling the Drawers

Instruction: Construct each drawer by connecting its side panels, bottom board, and the ridged front panel. If the gold circle handles aren’t pre-installed, secure them from inside the drawer front with the screws provided. Repeat for the second drawer.

Image 3 (Wide Shot): Two drawer boxes, each with a ridged front panel and a central circular handle, are shown partially assembled on the floor. A screwdriver is visible, fastening the final screws for the drawer sides.

Step 4: Installing the Drawers & Base

Instruction: Carefully slide each assembled drawer onto the rails inside the nightstand frame, testing their movement by gently pulling in and out. If the design includes a separate plinth base, flip the nightstand upside down and attach the base to the underside using the provided bolts. Once secure, return the nightstand to its upright position.

Image 4 (Wide Shot): The nightstand is upright, with each drawer partially open to demonstrate smooth gliding. A small bag of screws is on the floor, used for final base or rail adjustments.

Step 5: Final Checks & Styling

Instruction: Gently shake the entire unit to confirm stability. Tighten any remaining bolts or screws, and wipe down the wooden surfaces with a soft cloth to remove dust or fingerprints. Place your newly assembled nightstands beside the bed—use the drawers for personal items and let the ridged fronts and gold handles stand out as a modern design statement.

Image 5 (Wide Shot): The fully assembled nightstands stand in a bright room, drawers neatly closed, emphasizing the ridged fronts and bold circular handles. The plinth base creates a sturdy, streamlined look.

Conclusion

By following these five steps, you’ll have a pair of elegant nightstands that combine striking ridged drawer fronts with polished gold handles. The ample drawer space keeps essentials within reach, while the contemporary design complements a variety of bedroom styles. Enjoy your newly assembled furniture and the stylish impact it brings to your space!