Assembling a Desk with Integrated Shelving A Step-by-Step Guide

Step 1: Unboxing & Organizing

Instruction: Begin by carefully unboxing all parts. You should have the main desktop panel (1200 mm x 520 mm), two vertical side panels (one at 720 mm high, another at 1440 mm), multiple shelf boards (some measuring 550 mm in depth, others 290 mm wide), and a hardware kit (screws, bolts, and dowels). Lay everything out on a clean surface, verifying each item against the parts list.

Image 1 (Wide Shot): The various concrete-finish panels are spread neatly on the floor, along with labeled bags of screws and a small toolkit (screwdriver, hex key). The taller panel (1440 mm) stands propped against the wall.

Step 2: Building the Side Panel & Desk Support

Instruction: Identify the shorter vertical panel (720 mm) and attach it to the main desktop. Align the pre-drilled holes, then secure the pieces using the provided screws or dowels. This step forms the primary support on one side of the desk.

Image 2 (Wide Shot): The desk surface lies flat on the floor, with the 720 mm side panel aligned along one edge. A screwdriver and a few loose bolts rest close by, illustrating the assembly process.

Step 3: Attaching the Tall Shelving Unit

Instruction: Next, take the 1440 mm tall panel and connect it to the desktop’s opposite side. Carefully slide the shelf boards (some around 550 mm deep, others 290 mm wide) into place between the tall panel and any intermediate supports. Ensure each shelf is level before tightening the screws fully.

Image 3 (Wide Shot): The tall side panel is now upright, forming an L-shape with the desktop. Several shelf boards are partially installed, and a hex key is visible being used to secure the bolts.

Step 4: Securing the Remaining Shelves

Instruction: With the main framework in place, attach the remaining shelf boards at the appropriate heights (e.g., one near the base, another mid-level, and one toward the top). Double-check that each shelf lines up with the pre-drilled holes in the vertical panels. Tighten the screws or dowels to keep the structure sturdy.

Image 4 (Wide Shot): The shelves are all installed, creating distinct cubby spaces on the tall side. The concrete-style finish is consistent throughout, and a few extra screws lie on the floor, ready for final adjustments.

Step 5: Final Checks & Personalization

Instruction: Once all parts are attached, gently shake the desk to confirm stability. Tighten any loose bolts, then wipe down the surfaces with a soft cloth to remove dust or fingerprints. Finally, personalize your new desk—arrange books, décor, or office supplies on the shelves, and place your computer or writing materials on the spacious desktop.

Image 5 (Wide Shot): The fully assembled desk stands in a well-lit room. Each shelf is ready for storage, while the broad work surface is clear, awaiting a computer or accessories.

Conclusion

By following these five steps, you’ll have a modern, space-saving desk that combines ample storage with a sleek, industrial look. The tall shelving unit helps you keep essentials organized, while the sturdy desktop offers plenty of room for work or study. Enjoy your new setup and the functionality it brings to your space!